SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
Includes inspect steering & suspension systems and adjust all wheel (when possible and when needed) toe adjustment settings to factory specifications.
TIE ROD &/OR END – Remove & Replace – Inner,One Side – [Includes: R&I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replaci
Includes check system operation, re-charge w/ appropriate refrigerant to manufacturers capacity specifications and add leak detection dye for future leak diagnosis. System evacuation IS included. NOTE: NO REFRIGERANT LEAK COULD BE FOUND AT THIS TIME.
STUART Y. gave our service a 5 star review on 6/9/2023
Scan computer system for codes, minimum labor to inspect computer components and clear computer memory. CODE P0303
Induction system service includes cleaning of intake manifold through vacuum system, clean and service throttle body butterfly valve and add fuel injection cleaner to fuel tank.
IGNITION COIL – Remove & Replace – 2.0L Eng All – [Includes: R&I Intake Manifold.]
MIKE & ANNA S. gave our service a 5 star review on 4/21/2023
Labor included necessary time for system inspections, diagnostic testing and test drive based on minimum 1/2 hour labor time. LOOKED FOR KNOCKING NOISE ON STARTUP – NOISE IS NOT ALL THE TIME – SOUNDS LIKE SOMETHING IS KNOCKING AGAINST SOMETHING ELSE – LOOKED UNDERNEATH AND FOUND EXHAUST HEATSHIELD AND FRONT EXHAUST HANGER BRACKET KNOCKING AGAINST THE FRAME – SECURED THOSE TWO THINGS AND THE NOISE STILL PERSISTS – LISTENED TO ENGINE AND TRANSMISSION PAN WHILE CRANKING – CAN HEAR THE KNOCK INSIDE THE ENGINE SOMEWHERE – LIKELY ITS DUE TO A WORN ENGINE COMPONENT – CUSTOMER TO VISIT NISSAN DEALER FOR FURTHER DIAGNOSIS AND REPAIR
BETSY M. gave our service a 5 star review on 3/8/2023